Euro209 and Euro 205xLine

 

Trio Motion Controller Euro209/205x

Features

    • High performance, low cost Eurocard Motion Coordinator
    • Linear, Circular, Helical and Spherical Interpolation *
    • Dedicated Coldfire ® communications co-processor *
    • Designed for low-cost OEM volume applications
    • 1-4 (1-8) Servo/stepper axes in any combination
    • Multi-tasking BASIC Programming
    • Built-in CAN channel
    • Configurable using feature enable codes
    • Built-in opto-isolated inputs/outputs *
    • Registration inputs
* Applicable only for Euro 209

 

Euro209 3U Eurocard overview

User programs are written in Trio’s established Multi-Tasking TrioBASIC and applications can be developed using the Windows based Motion Perfect environment. Complex motion profiles are easily programmed and these can be linked to a master encoder input for slaving, gearing and cams.

Communications

The ethernet port is controlled by a dedicated Coldfire® communications co-processor allowing fast reliable data communication between the Euro209 and PC and gives the ability to program multiple cards over an Ethernet LAN.

The Euro209 has one RS-232 port and one RS-485 built in that may be configured to run the MODBUS protocol for PLC or HMI interfacing. If the built-in CAN channel is not used for connecting I/O modules, it may optionally be used for CAN communications or as a DeviceNet Slave.

The Euro209 features a total of 16 axes in software. Any axes not having a hardware interface can be used as a “virtual” axis.

 

 

 

Euro205x 160x100mm Eurocard overview

User Programs are written in Trio’s established Multi-Tasking BASIC and applications can be developed using the Windows based Motion Perfect environment. Complex motion profiles are available and these can be linked to a master encoder input for Slaving, Gearing and Cams.

The unit has 24 opto-isolated digital I/O (16 inputs & 8 outputs) on board. 4 Fast hardware registration inputs are available on each axis for highly accurate control of print and packaging lines. 2 x 12 bit analogue input channels are provided on the board.

Communications

The I/O count can be expanded using Trio CANbus Digital I/O and Analog Input modules. The CANbus port also supports DeviceNet and CanOpen protocols. The Euro205x has two built in RS-232 ports. In addition, a full-duplex RS-485 channel is provided and a further serial channel is available at TTL levels.

An external adapter can be used to allow the TTL level serial port to link to Trio Fibre Optic Network devices.

 

Downloads

 

        PDF Icon  Software Manual

 

        PDF Icon  Hardware Manual Euro205x & Euro209

 

        PDF Icon  Quick Start Guide

 

        PDF Icon  Data Sheet Euro205x & Euro209