Quick Connectors




  • For new Econo applications, Galil recommends the new generation DMC-41x3 series controllers
  • Ethernet 10Base-T port; (1) 19.2kb RS232 port
  • Card-level controller in 1 through 8 axis versions: DMC-21x3 where x=1,2,3,4,5,6,7,8 axes
  • User-configurable for stepper or servo motors on any combination of axes 
  • Optional plug-in amplifier boards for driving stepper, brush or brushless servo motors up to 500 Watts
  • Ethernet supports multiple masters and multiple slaves. TCP/IP, UDP and ModBus TCP master protocol for communication with I/O devices
  • Accepts encoder frequencies up to 12 MHz for servos and outputs up to 3 MHz for steppers 
  • Modes of motion include jogging, point-to-point positioning, contouring, linear and circular interpolation, electronic gearing and ECAM. Ellipse scaling, slow-down around corners, infinite segment feed and feedrate override
  • Multitasking for concurrent execution of up to eight application programs
  • Non-volatile memory for application programs, variables and arrays